Show Nsm Client; Show Process - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

show nsm client

This command displays system details for use by Allied Telesis authorized service personnel
only.
Syntax
show nsm client
Privileged Exec mode
Mode

show process

This command lists a summary of the current running processes.
For a stacked configuration, if this command is entered on the stack master, it will display the
information for all the stack members. A stack member heading will be displayed to distinguish
the different information for every stack member.
If it is entered on a specific stack member, as a host-directed command, it will display the
information for that stack member.
Syntax
show process [sort {cpu|mem}]
Parameter
sort
Exec mode and Privileged Exec mode
Mode
To display a summary of the current running processes, use the command:
Example
Figure 8-8: Example output from the show process command
Output
8.28
Description
Changes the sorting order for the list of processes.
cpu
mem
awplus#
CPU load for 1 minute: 0%; 5 minutes: 3%; 15 minutes: 0%
RAM total: 514920 kB; free: 382600 kB; buffers: 16368 kB
user processes
==============
pid name thrds
962 pss
1 init
797 syslog-ng
kernel threads
==============
pid name cpu%
71 aio/0 0
3 events/0 0
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Sorts the list by the percentage of CPU utilization.
Sorts the list by the percentage of memory utilization.
show process
cpu% mem% pri
12 0 6 25
1 0 0 25
1 0 0 16
pri state sleep%
20 sleep 0
10 sleep 98
state sleep%
sleep 5
sleep 0
sleep 88
C613-50007-01 REV B