Show Ipv6 Rip - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIPng Commands

show ipv6 rip

show ipv6 rip Command
Use this command to show RIPng routes.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show ipv6 rip
Privileged Exec mode and Exec mode
Mode
Example
The following is a sample output from the show ipv6 rip command:.
Output
show ipv6 rip database
Related Commands
34.16
New vs_531 %flag
awplus# show ipv6 rip
Routing Protocol is "RIPng"
Sending updates every 30 seconds with +/-50%, next due in 10
seconds
Timeout after 180 seconds, garbage collect after 120 seconds
Outgoing update filter list for all interface is not set
Incoming update filter list for all interface is not set
Default redistribute metric is 1
Redistributing: connected
Routing for Networks:
3ffe:1::/64
Codes: R - RIP, Rc - RIP connected, Rs - RIP static, Ra - RIP
aggregated, Rcx - RIP connect suppressed, Rsx - RIP static
suppressed, C - Connected, S - Static, O - OSPF, B - BGP
Network
3ffe:1::/64
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
RIPng Commands Use this command to show RIPng routes.
Next Hop If Met Tag Time
C613-50007-01 REV B