Vlan Classifier Activate - Allied Telesis SwitchBlade x908 Series Software Reference Manual

VLAN Commands

vlan classifier activate

Use this command to associate a VLAN classifier group with the switch port.
Use the no version of this command to remove the group from the switch port.
Syntax
vlan classifier activate <vlan-class-grp-id>
no vlan classifier activate
Parameter
<vlan-class-grp-id>
Interface mode
Mode
To associate VLAN classifier group 3 with switch port 1.1.3
Example
awplus(config-if)#
show vlan classifier rule
Related Commands
vlan classifier group
vlan classifier rule ipv4
vlan classifier rule proto
17.18
awplus# configure terminal
awplus(config)# interface port1.1.3
vlan classifier activate 3
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Description
VLAN classifier group identifier (1-16).
C613-50007-01 REV B