clear ip bgp flap-statistics
Use this command to clear the flap count and history duration for the specified prefixes.
Syntax
clear ip bgp flap-statistics [<ip-address>|<ip-address/m>]
clear ip bgp ipv4 <prefix> flap-statistics[<ip-address>|<ip-address/
Parameter
<ip-address>
<ip-address/m>
ipv4
<prefix>
unicast
multicast
Privileged Exec mode
Mode
Example
awplus#
awplus#
C613-50007-01 REV B
m>]
Description
Specifies the IPv4 address for which BGP flap count and history
duration are to be cleared.
Specifies the IPv4 address with mask for which BGP flap count and
history duration are to be cleared.
Clears all IPv4 address family peers. Configure parameters relating to
the BGP exchange of IPv4 prefixes.
{unicast|multicast}
unicast address family modifier. Configure parameters relating to the
BGP exchange of routes to unicast destinations.
multicast address family modifier. Configure parameters relating to the
BGP exchange of routes to multicast sources.
clear ip bgp flap-statistics 10.10.0.121
clear ip bgp ipv4 unicast flap-statistics
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
BGP Commands
38.39