Configuring Flag Options (Nsm Procedure); Configuring Packet Filter Options (Nsm Procedure); Table 232: Flag Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 231: File Configuration Details (continued)
Option Function
world-readable Allows any user to read the log file.
no-world-readable Prevents any user from reading the log file.
Match Specifies the regular expression for the lines to be logged.

Table 232: Flag Configuration Details

Option
Name
Comment
Copyright © 2010, Juniper Networks, Inc.

Configuring Flag Options (NSM Procedure)

To configure flag options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the flag options.
Click the Configuration tab. In the configuration tree, select Security > Flow >
3.
Traceoptions > Flag.
Add or modify settings as specified in Table 232 on page 399.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the flag settings.
Function
Specifies the trace flag name.
Supplies a descriptive comment for the trace flag.

Configuring Packet Filter Options (NSM Procedure)

To configure packet filter options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the packet filter options.
Click the Configuration tab. In the configuration tree, select Security > Flow >
3.
Traceoptions > Packet Filter.
Add or modify settings as specified in Table 233 on page 400.
4.
Click one:
5.
OK—Saves the changes.
Chapter 22: Configuring Security
Your Action
(Optional) Select the option.
(Optional) Select the option.
Enter the match expression.
Your Action
Select a name from the list.
(Optional) Enter a comment.
399