Display Bgp Routing-Table As-Path-Acl - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – IPv4 Routing

H3C S7500E Series Ethernet Switches

5.1.21 display bgp routing-table as-path-acl

display bgp routing-table as-path-acl as-path-acl-number

as-path-acl-number: Displays routing information permitted by the AS path ACL, which

is specifies with a number from 1 to 256.

Use the display bgp routing as-path-acl command to display BGP routes permitted

by an as-path ACL.

# Display BGP routes permitted by AS path ACL 1.

<Sysname> display bgp routing-table as-path-acl 1

BGP Local router ID is 20.20.20.1

Status codes: * - valid, > - best, d - damped,

40.40.40.0/24

Origin attribute of the route, one of the following values:

Indicates that the route is interior to the AS.

Summary routes and the routes configured using the

network command are considered IGP routes.

Indicates that the route is learned via the exterior gateway

protocol (EGP).

Short for INCOMPLETE. It indicates that the origin of the

route is unknown and the route is learned by other means.

h - history,

Origin : i - IGP, e - EGP, ? - incomplete

for description on the fields above.

Chapter 5 BGP Configuration Commands

i - internal, s - suppressed, S - Stale

PrefVal Path/Ogn

Table of Contents