Object-policy ip a
Object-policy ip c
# Display detailed acceleration information for IPv4 object policy a.
<Sysname> display object-policy accelerate verbose ip a
Object-policy ip a
rule 1 drop
rule 0 pass (failed)
Table 147 Command output
Field
failed
display object-policy ip
Use display object-policy ip to display information about IPv4 object policies.
Syntax
display object-policy ip [ object-policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
object-policy-name: Specifies an object policy by its name, a case-insensitive string of 1 to 63
characters. If you do not specify an object policy name, this command displays information about all
IPv4 object policies.
Usage guidelines
This command displays IPv4 object policy rules in the order they were configured.
Examples
# Display information about all IPv4 object policies.
<Sysname> display object-policy ip
Object-policy ip pass
This is an IPv4 object policy for the zone-pair security source office destination library
Object-policy accelerated
rule 5 pass source-ip sourceip
rule 5 comment This rule is used for source-ip sourceip
Table 148 Command output
Field
Object-policy ip pass
This is an IPv4 object policy for the
zone-pair security source office destination
library
Description
Rule matching acceleration and rule matching failed.
Description
Name of the IPv4 object policy.
Description of the IPv4 object policy.
956