Pvc-Group; Pvc Max-Number - H3C MSR 20-20 Command Reference Manual

308 C 19: ATM C
HAPTER

pvc-group

Syntax
View
Parameter
Description
Related command:
Example

pvc max-number

Syntax
View
C
ONFIGURATION OMMANDS
pvc-group { pvc-name [ vpi/vci ] | vpi/vci }
undo pvc-group { pvc-name [ vpi/vci ] | vpi/vci }
ATM interface view
pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not
case-sensitive. The name cannot be the same as a valid VPI/VCI pair value. For
example, the name 1/20 is not allowed. The PVC corresponding to pvc-name must
have already been created.
vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0
to 255. VCI is short for virtual channel identifier; its value range varies by interface
type. Normally, values from 0 to 31 are reserved for special purpose, you are not
recommended to use them. For details on the value range, refer to "VCI range for
each type of ATM interface" on page 307.
Use the pvc-group
Use the
undo pvc-group
In creating a PVC-Group, the pvc-name argument or the vpi/vci argument defines
the primary PVC of the PVC-Group.
Before creating a PVC group, make sure the corresponding PVC exists.
The encapsulation command and the oam-related commands are not applicable
to secondary PVCs. The configurations corresponding to these commands on the
primary PVC of a PVC group apply to all the secondary PVCs in the PVC group.
ip-precedence, pvc.
# Create a PVC group named "aa", with the primary PVC being the PVC with the
VPI/VCI value of 1/32.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] pvc aa 1/32
[Sysname-atm-pvc-group-Atm1/0-1/32-aa] quit
[Sysname-Atm1/0] pvc-group aa 1/32
pvc max-number max-number
undo pvc max-number
ATM interface view
command to create a PVC group or enter PVC group view.
command to delete the specified PVC-Group.