Reset Lacp Statistics; Shutdown - H3C MSR Series Command Reference Manual

Comware 5 layer 2 - lan switching
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

route-aggregation: Clears statistics for Layer 3 aggregate interfaces.
interface-number: Specifies an aggregate interface by its number in the range of 1 to 1024 for Layer
2 aggregate interfaces and 1 to 16 for Layer 3 aggregate interfaces.
Usage guidelines
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the
existing statistics of the interface.
If no keyword or argument is specified, the command clears the statistics of all interfaces in the
system.
If only the bridge-aggregation or route-aggregation keyword is specified, the command
clears the statistics of all Layer 2 or Layer 3 aggregate interfaces.
If the bridge-aggregation interface-number or route-aggregation interface-number option is
specified, the command clears the statistics of the specified Layer 2 or Layer 3 aggregate
interface.
The bridge-aggregation or route-aggregation keyword becomes available only after you
create Layer 2 or Layer 3 aggregate interfaces on the device.
Examples
# Clear the statistics of Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1

reset lacp statistics

Use reset lacp statistics to clear the LACP statistics on the specified member ports or all member
ports, if no member ports are specified.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Default command level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number1 [ to interface-type interface-number2 ], where interface-type interface-number
specifies an interface by its type and number.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port

shutdown

Use shutdown to shut down the aggregate interface or subinterface.
Use undo shutdown to bring up the aggregate interface or subinterface.
113

Advertisement

Table of Contents
loading

Table of Contents