Dialer Bundle; Dialer Bundle-Member - H3C MSR 20-20 Command Reference Manual

20

dialer bundle

Syntax
View
Parameter
Description
Related command:
Example

dialer bundle-member

Syntax
View
Parameter
DCC C
n
Set all synchronous/asynchronous serial interfaces involved in DCC configuration
to work in asynchronous mode with the physical-mode async command.
dialer bundle number
undo dialer bundle
Dialer interface view
number: Dialer bundle number, in the range 1 to 255.
Use the dialer bundle
interface in RS-DCC.
Use the undo dialer bundle
By default, dialer interfaces are not associated with any dialer bundle in RS-DCC.
This command applies only to dialer interfaces. In addition, a dialer interface can
be associated with only one dialer bundle.
dialer bundle-member.
# Associate dialer bundle 3 with interface Dialer1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] dialer bundle 3
dialer bundle-member number [ priority priority ]
undo dialer bundle-member number
Dial (physical) interface view
number: Dialer bundle number, in the range 1 to 255.
ONFIGURATION
command to associate a dialer bundle with a dialer
command to remove the association.
C
OMMANDS