Table of Contents
Advertisement
DAC Functional Description
18.14 DAC Functional Description
This section provides DAC functional description.
18.14.1 Voltage Reference Source Select
• V
should be used to connect to the primary voltage source as supply reference of
in1
64 tap resistor ladder
• V
should be used to connect to alternate voltage source (or primary source if
in2
alternate voltage source is not available)
18.15 DAC Resets
This module has a single reset input, corresponding to the chip-wide peripheral reset.
18.16 DAC Clocks
This module has a single clock input, the bus clock.
18.17 DAC Interrupts
This module has no interrupts.
316
MC9S08SU16 Reference Manual, Rev. 5, 4/2017
NXP Semiconductors
Advertisement
Table of Contents
