Chapter 19
FlexTimer Module (FTM)
19.1 Chip specific FlexTimer module
This device has one Flextimer (FTM) module.
The FlexTimer module is a two-channel timer that supports input capture, output
compare, and the generation of PWM signals. FTM time reference is a 16-bit counter that
can be used as an unsigned or signed counter. It is fully backward compatible to the
TPM.
FTM module has independent external clock input. The following table summarizes the
signals of FTM module.
Customization:
• Primary clock: BUSCLK (20 MHz)
• Alternate clock: ICSFFCLK/2, TCLK
• FTM module has independent external clock input. The following table summarizes
thel signals of FTM module.
Module
FTM
NXP Semiconductors
Table 19-1. FTM module signals
Connection
channel 0 output
channel 0 input
channel 1 output
channel 1 input
Internal Clock
External Clock
MC9S08SU16 Reference Manual, Rev. 5, 4/2017
Signal
Connect to
XBAR_IN10
XBAR_OUT4
XBAR_IN11
XBAR_OUT5
BUSCLK, ICSFFCLK/2
PTB6/TCLK
317