System Configuration
5.6.5.1
Periodic Interval Timer Control Register (PTCNR)
The periodic interval timer control register (PTCNR), shown in
PIT functions. The register can be read at any time.
Offset 0x00
0
R
W
Reset
Figure 5-33. Periodic Interval Timer Control Register (PTCNR)
Table 5-48
defines the bit fields of PTCNR.
Bits
Name
0–23
—
Write reserved, read = 0
24
CLEN
Clock enable control bit. Controls the counting of the PIT. When the PIT's clock is disabled, the counter
maintains its old value. When the counter's clock is enabled, it continues counting using the previous value.
0 Disable counter.
1 Enable counter.
25
CLIN
Input clock control bit. The input clock to the PIT can be either an internal system clock or an external PIT
clock.
0 The input clock to the periodic interrupt timer is internal system clock.
1 The input clock to the periodic interrupt timer is external PIT clock.
26–30
—
Write reserved, read = 0
31
PIM
Periodic interrupt mask bit. Used to enable or disable (mask) the PIT periodic interrupt.
0 Periodic interrupt generation disabled.
1 Periodic interrupt generation enabled.
5.6.5.2
Periodic Interval Timer Load Register (PTLDR)
The periodic interval timer load register (PTLDR), shown in
loaded in a 32-bit PIT counter.
Offset 0x04
0
R
W
Reset
MPC8313E PowerQUICC II Pro Integrated Processor Family Reference Manual, Rev. 3
5-46
—
Table 5-48. PTCNR Bit Settings
Figure 5-34. Periodic Interval Timer Load Register (PTLDR)
Figure
5-33, is used to enable the different
23
All zeros
Description
Figure
5-34, contains the 32-bit value to be
CLDV
All zeros
Access: Read/Write
24
25
26
CLEN CLIN
—
Access: Read/Write
Freescale Semiconductor
30
31
PIM
31