Existence-Test - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

existence-test

existence-test { event eventOwner eventName |
Syntax
startup { absent | present } | test-type { absent | changed | present } }
no existence-test [ event | startup | test-type ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines existence test values for the trigger that you are configuring, including binding
Description
an event to the existence-test trigger, specifying a startup condition, and defining an
existence-test type. The no version deletes the existence-test values for this trigger
or removes either the startup condition or event binding.
Options
SNMP Trigger Configuration
Mode
eventOwner Name of event owner that partially specifies event to trigger the
existence test; string of up to 32 alphanumeric characters
eventName Name of event that partially specifies event to trigger the existence
test; string of up to 32 alphanumeric characters
startup Specifies startup existence condition that you predict the sample to
follow; absent or present; you can specify both conditions in the same command
test-type Specifies type of existence test to perform; absent, changed, or present;
you can specify one, two, or all three conditions in the same command
Chapter 6: E Commands
597
existence-test