Ftp Server Enable; Ftp Timeout - H3C s3100 series Command Manual

ftp server enable

Syntax
ftp server enable
undo ftp server
View
System view
Parameters
None
Description
Use the ftp server enable command to enable the FTP server function of the switch.
Use the undo ftp server command to disable the FTP server function of the switch.
By default, the FTP server function is disabled on the H3C S3100 series switch to avoid potential
security risks.
To protect unused sockets from being attacked by malicious users, the H3C S3100 series Ethernet
switch provides the following functions:
TCP 21 is enabled only when you start the FTP server.
TCP 21 is disabled after you shut down the FTP server.
Related commands: display ftp-server.
Examples
# Enable the FTP server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ftp server enable
% Start FTP server

ftp timeout

Syntax
ftp timeout minutes
undo ftp timeout
View
System view
1-4