Table of Contents
Advertisement
XEM2 Ethernet
Line Cards
Management
Software and
Interfaces
Management
Methods
The XEM2 Ethernet line cards are listed here:
The XEM2 Ethernet line cards are for the x950-28XSQ and
x950-28XTQm switches.
XEM2-8XSTm Card features four 100Mbps and 1/2.5/5/10Gbps
twisted pair ports with RJ-45 connectors and four ports for 1Gbps
SFP or 10Gbps SFP+ transceivers. Refer to "XEM2-8XSTm Line
Card" on page 53.
XEM2-12XT Card features 12 twisted pair ports with speeds of
100Mbps and 1/10Gbps, and RJ-45 connectors. Refer to
"XEM2-12XT Line Card" on page 57.
XEM2-12XTm Card features 12 twisted pair ports with speeds of
100Mbps and 1/2.5/5/10Gbps, and RJ-45 connectors. Refer to
"XEM2-12XTm Line Card" on page 59.
XEM2-12XS and XEM2-12XS v2 Cards feature 12 ports for
1/2.5/5/10Gbps SFP/SFP+ transceivers. Refer to "XEM2-12XS
and XEM2-12XS v2 Line Cards" on page 61.
XEM2-4QS Card features four ports for 40Gbps QSFP+
transceivers. Refer to "XEM2-4QS Line Card" on page 64.
XEM2-1CQ Card features one port for the 100Gbps QSFP28
transceiver. Refer to "XEM2-1CQ Line Card" on page 66.
Line cards are ordered separately. Refer to the product data sheet on the
Allied Telesis web site for a list of approved transceivers.
Here are the management software and interfaces:
AlliedWare Plus management software.
Command line interface, available locally through the Console port
or remotely over the network.
The AlliedWare Plus management software comes pre-installed on the
switch.
You can manage the switch as follows:
Command line interface accessed locally through the Console port
or remotely using Telnet or Secure Shell.
Remote access with SNMPv1, v2c, or v3.
x950 Series Installation Guide for Standalone Switches
17
Advertisement
Table of Contents
