Clear Line Console - Allied Telesis IE340 Series Command Reference Manual

U A C
SER CCESS OMMANDS

CLEAR LINE CONSOLE

clear line console
Overview This command resets a console line. If a terminal session exists on the line then the
terminal session is terminated. If console line settings have changed then the new
settings are applied.
clear line console 0
Syntax
Mode Privileged Exec
Example To reset the console line (asyn), use the command:
awplus#
% The new settings for console line 0 have been applied
Related clear line vty
commands
flowcontrol hardware (asyn/console)
line
show users
C613-50631-01 Rev A
clear line console 0
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
204