Figure 38: Alliedware Plus Command Line Prompt - Allied Telesis FS970M Series Installation Manual

FS970M Series Installation Guide
5. Enter the user name and password to log on the switch. If this is the
initial management session of the switch, enter "manager" as the user
name "friend" as the password. The user name and password are case
sensitive.
The local management session starts when the AlliedWare Plus™
command line prompt, shown in Figure 38. is displayed.
awplus>
Figure 38. AlliedWare Plus Command Line Prompt
For information on the command line interface, refer to the FS970M
Series AlliedWare Plus Command Line Interface User's Guide.
89