Exec-Timeout - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

exec-timeout

Syntax
Release Information
Description
Options
Mode
608
exec-timeout minutes [ seconds ]
no exec-timeout
Command introduced before JunosE Release 7.1.0.
Sets the time interval that the console or vty line waits for expected user input. The no
version restores the default value, which is no time limit.
minutes—Number of minutes for the time limit; in the range from 0 to 35791
seconds—Number of seconds in addition to the minutes for the time limit; in the range
from 0 to 2147483
Line Configuration
Copyright © 2010, Juniper Networks, Inc.