Exec-Banner - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

exec-banner

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no | default ] exec-banner
Command introduced before JunosE Release 7.1.0.
Controls display of an exec banner (configured with the banner command) on a particular
line after user authentication (if any) and before the first prompt of a CLI session. The
no version disables the exec banner and the motd banner on the line. The default version
restores the default setting, in which the banner is enabled on all lines.
Line Configuration
Chapter 6: E Commands
607