Excess-Burst - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

excess-burst

Syntax
Release Information
Description
Options
Mode
Related
Documentation
604
excess-burst { size | millisecond milliseconds }
no excess-burst
Command introduced before JunosE Release 7.1.0.
Sets amount of bandwidth allocated to accommodate a packet in progress when the
rate is in excess of the burst. The no version restores the default value, 0.
size—Amount of bandwidth allocated; in the range 0–4294967295
milliseconds—Milliseconds in the range 1–10000
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Copyright © 2010, Juniper Networks, Inc.