Display Bgp Network - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Up/Down
State

5.1.17 display bgp network

Syntax
display bgp network
View
Any view
Parameters
None
Description
Use the display bgp network command to display routing information that has been
advertised.
Examples
# Display routing information that has been advertised.
<Sysname> display bgp network
BGP Local Router ID is 10.1.4.2.
Local AS Number is 400.
Network
100.1.2.0
100.1.1.0
Table 5-3 Description on the fields of the display bgp network command
BGP Local Router ID
Local AS Number
Network
Mask
Field
The lasting time of a session/the lasting time of
present state (when no session is established)
State machine of peer
Mask
255.255.255.0
255.255.255.0
Field
5-15
Chapter 5 BGP Configuration Commands
Description
Route-policy
Description
BGP Local Router ID
Local AS Number
Network address
Mask
Short-cut
Short-cut