Display Igmp-Snooping Group - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
Enable IGMP-Snooping.
The router port timeout is 105 second(s).
The max response timeout is 10 second(s).
The host port timeout is 260 second(s).
The above-mentioned information shows: IGMP Snooping is enabled, the aging time of
the router port is 105 seconds, the query response timeout time is 10 seconds, and the
aging time of multicast member ports is 260 seconds.

1.1.2 display igmp-snooping group

Syntax
display igmp-snooping group [ vlan vlan-id ]
View
Any view
Parameter
vlan-id: VLAN under which the multicast group information is to be displayed. If you do
not provide this argument, this command displays the multicast group information of all
VLANs.
Description
Use the display igmp-snooping group command to display information about the IP
and MAC multicast groups under the specified VLAN (with vlan vlan-id) or all VLANs
(without vlan vlan-id).
This command displays the following information: VLAN ID, router port, IP multicast
group address, member ports included in the IP multicast group, MAC multicast group,
MAC multicast group address, and member ports included in the MAC multicast group.
Example
# Display the information about the multicast groups under all the VLANs.
<H3C> display igmp-snooping group
Total 1 IP Group(s).
Total 1 MAC Group(s).
Vlan(id):99.
Total 1 IP Group(s).
Total 1 MAC Group(s).
Static Router port(s):
Dynamic Router port(s):
Ethernet1/0/11
Ethernet1/0/22
1-2
Chapter 1 IGMP Snooping Configuration
Commands