Ip-Precedence; Interface Atm - H3C MSR 20-20 Command Reference Manual

interface atm

Syntax
View
Parameter
Description
]Example

ip-precedence

Syntax
View
Parameter
interface atm { interface-number | interface-number.subnumber [ p2mp | p2p ] }
undo interface atm interface-number.subnumber
System view
interface-number: ATM main interface number.
subnumber: ATM sub-interface number, in the range 0 to 1023.
p2mp: Point-to-multiple point connection on the sub-interface
p2p: Point-to-point connection on the sub-interface
Use the interface atm
ATM sub-interface view
Use the
undo interface atm
Be default, the connection type of sub-interface is p2mp.
n
Two types of connections are available on ATM sub-interface: p2mp and p2p. In
p2mp connection, you can create multiple PVCs on the sub-interface; In p2p
connection, you can create just one PVC on the sub-interface.
# Enter Atm1/0 interface.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0]
# Create and enter sub-interface Atm1/0.1, and set its connection type to p2p.
<Sysname> system-view
[Sysname] interface atm 1/0.1 p2p
[Sysname-Atm1/0]
ip-precedence { pvc-name [ vpi/vci ] | vpi/vci } { min [ max ] | default }
undo ip-precedence { pvc-name [ vpi/vci ] | vpi/vci }
ATM PVC-group view
pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not
case-sensitive. The name cannot be the same as a valid VPI/VCI pair value. For
example, the name 1/20 is not allowed.
command to create an ATM sub-interface or enter an
command to delete ATM sub-interface.
299