Display Fib Ip-Address - H3C s3600 series Command Manual

Table 2-1 Description on the fields of the display fib command
Field
Flag
Destination/Mask
Nexthop
TimeStamp
Interface

display fib ip-address

Syntax
display fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 | mask-length2 } | longer ] |
longer ]
View
Any view
Parameters
ip-address1, ip-address2: Destination IP addresses, in dotted decimal notation. ip-address1 and
ip-address2 together define an address range. The FIB entries in this address range will be displayed.
mask1, mask2: Subnet masks, in dotted decimal notation.
mask-length1, mask-length2: Length of the subnet masks, the number of consecutive ones in the
masks, in the range of 0 to 32.
longer: Displays the FIB entries matching the specified address/mask and having masks longer than or
equal to the specified mask. If no masks are specified, FIB entries that match the natural network
address and have the masks longer than or equal to the natural mask will be displayed.
Flags:
U: A route is up and available.
G: Gateway route
H: Local host route
B: Blackhole route
D: Dynamic route
S: Static route
R: Rejected route
E: Multi-path equal-cost route
L: Route generated by ARP or ESIS
Destination address/mask length
Next hop address
Timestamp
Forwarding interface
2-2
Description