ADTRAN AOS Version R10.1.0 Command Reference Manual page 2609

Command Reference Guide
dial-backup shutdown
Use the dial-backup shutdown command to deactivate all dial-backup functionality in the unit.
Dial-backup configuration parameters are kept intact, but the unit will not initiate (or respond) to
dial-backup sequences in the event of a network outage. Use the no form of this command to reactivate the
dial-backup interface. For more detailed information on Point-to-Point Protocol (PPP) dial-backup
functionality, refer to the Functional Notes and Technology Review sections of the command
call-mode on page 2596.
Syntax Description
No subcommands.
Default Values
By default, all AOS interfaces are disabled.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example deactivates the configured dial-backup interface:
(config)#interface tunnel 1
(config-tunnel 1)#dial-backup shutdown
60000CRG0-35E
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2012 ADTRAN, Inc.
Tunnel Interface Command Set
dial-backup
2609