ADTRAN AOS Version R10.1.0 Command Reference Manual page 2584

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
PPP Interface Command Set
rtp quality-monitoring
Use the rtp quality-monitoring command to enable voice quality monitoring (VQM) of the Realtime
Transport Protocol (RTP) voice stream packets on this interface. If the global command (ip rtp
quality-monitoring) is disabled when this command is issued, the system will return the following
warning: "Applied but not used, you must globally enable ip rtp quality-monitoring to use VQM." Use
the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, VQM is enabled on all wide area network (WAN) and local area network (LAN) interfaces.
Command History
Release 17.1
Command was introduced.
Usage Examples
The following example enables RTP quality monitoring on the virtual Point-to-Point Protocol (PPP)
interface:
(config)#interface ppp 1
(config-ppp 1)#rtp quality-monitoring
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2584

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents