ADTRAN AOS Version R10.1.0 Command Reference Manual page 2593

Command Reference Guide
dial-backup auto-backup
Use the dial-backup auto-backup command to configure the interface to automatically attempt a dial
backup upon failure. Use the no form of this command to disable this feature. For more detailed
information on dial-backup functionality, refer to the Functional Notes and Technology Review sections of
dial-backup call-mode on page
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically attempt dial backup upon a failure.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example enables automatic dial backup on the endpoint:
(config)#interface tunnel 1
(config-tunnel 1)#dial-backup auto-backup
60000CRG0-35E
2596.
Command was introduced.
Command was expanded to include the Point-to-Point Protocol (PPP)
interface.
Copyright © 2012 ADTRAN, Inc.
Tunnel Interface Command Set
2593