Table of Contents
Advertisement
Command Reference Guide
PPP Interface Command Set
ppp bcp tagged-frame
Use the ppp bcp tagged-frame command to allow negotiation of IEEE 802.1Q-tagged packets over
Bridging Control Protocol (BCP). Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this feature is disabled.
Command History
Release 14.1
Command was introduced.
Usage Examples
The following example configures Point-to-Point Protocol (PPP) interface 1 to negotiate tagged frames
over BCP:
(config)#interface ppp 1
(config-ppp 1)#ppp bcp tagged-frame
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2574
Advertisement
Table of Contents
