ADTRAN AOS Version R10.1.0 Command Reference Manual page 2581

Command Reference Guide
pppoe service-name <name>
Use the pppoe service-name command to use this tag value to filter Point-to-Point Protocol over Ethernet
(PPPoE) session offers from PPPoE servers. Use the no form of this command to return to the default
setting.
Syntax Description
<name>
Default Values
By default, no names are specified.
Command History
Release 5.1
Usage Examples
The following example defines a service type that is not to be accepted by AOS:
(config)#interface ppp 1
(config-ppp 1)#pppoe service-name Service_Name
60000CRG0-35E
Specifies a service name by text string (up to 255 characters)
corresponding to the Service-Name Tags under RFC 2516. This string
indicates an Internet service provider (ISP) name (or a class of service
(CoS) or quality of service (QoS))
acceptable.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PPP Interface Command Set
.
If this field is not specified, any service is
2581