ADTRAN AOS Version R10.1.0 Command Reference Manual page 2568

Command Reference Guide
peer default ipv6 interface-id <interface id>
Use the peer default ipv6 interface-id command to specify the default peer Internet Protocol version 6
(IPv6) interface ID of the remote end of this interface. Use the no form of this command to remove an
assigned IPv6 interface ID.
Syntax Description
<interface id>
Default Values
By default, there is no assigned default peer IPv6 interface ID.
Command History
Release 18.1
Usage Examples
The following example sets the default peer IPv6 interface ID to 2AA:FF:FE3F:2A1C:
(config)#interface ppp 1
(config-ppp 1)#peer default ipv6 interface-id 2AA:FF:FE3F:2A1C
60000CRG0-35E
Specifies the default peer IPv6 interface ID for the remote end. IPv6
interface IDs should be expressed in colon hexadecimal notation (X:X:X:X).
For example, 2AA:FF:FE3F:2A1C.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PPP Interface Command Set
2568