Set Threshold - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

set threshold

Syntax
Release Information
Description
Options
Mode
512
set threshold thresholdValue
no set threshold
Command introduced in JunosE Release 8.2.0.
Configures a threshold value for multicast VPN applications. The no version removes the
threshold value.
thresholdValue—Threshold value for multicast VPN applications
Global Configuration
Copyright © 2010, Juniper Networks, Inc.