Show Isis Mpls Tunnel - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show isis mpls tunnel

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show isis mpls [ traffic-eng ] tunnel [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about tunnels used in the calculation of IS-IS next hops.
traffic-eng—Specifies optional keyword for compatibility with non–E Series
implementations
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
959