Owner - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

owner

Syntax
Release Information
Description
Options
Mode
124
owner ownerValue
no owner
Command introduced before JunosE Release 7.1.0.
Configures the owner of the RTR operation. The no version restores the default value.
ownerValue—Specifies the owner's identifier: 0–255 ASCII characters; by default, no
owner is configured
RTR Configuration
Copyright © 2010, Juniper Networks, Inc.