JunosE 11.3.x Command Reference Guide N to Z
radius dynamic-request server
Syntax
Release Information
Description
Options
Mode
Related
Documentation
320
[ no ] radius dynamic-request server ipAddress
Command introduced before JunosE Release 7.1.0.
Specifies the IP address of a RADIUS dynamic-request server and puts the E Series router
into RADIUS Configuration mode. The no version deletes the instance of the RADIUS
server.
NOTE: The radius dynamic-request server command replaces the
functionality of the radius disconnect client command.
The RADIUS Disconnect Configuration mode is deprecated. Use the radius
dynamic-request server command to enter RADIUS Configuration mode and
configure options formerly available in RADIUS Disconnect Configuration
mode.
ipAddress—IP address of the server
Global Configuration
Configuring RADIUS-Based Mirroring
Copyright © 2010, Juniper Networks, Inc.