Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
neighbor maximum-orf-entries
Syntax
Release Information
Description
Options
Mode
44
neighbor { ipAddress | ipv6Address } maximum-orf-entries maximum
no neighbor { ipAddress | ipv6Address } maximum-orf-entries [ maximum ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Sets the maximum number of ORF entries of a particular type that are accepted from
the specified neighbor. The no version restores the default value of no limits.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
maximum—Maximum number of ORF entries in the range 0–4294967295; default
value is no limit
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
