Show Bridge Table - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show bridge table

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
show bridge { bridgeGroupName | vplsName } table [ static | dynamic ] [ filter ]
Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Displays information about the entries in the MAC address table for the specified bridge
group or VPLS instance. You can display information only for static entries, only for
dynamic entries, or for both static and dynamic entries.
bridgeGroupName—Name of a bridge group specified with the bridge command
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
static—Displays information for only static (nonlearned) entries in the MAC address
table
dynamic—Displays information for only dynamic (learned) entries in the MAC address
table
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Monitoring MAC Address Entries for a Specific VPLS Instance in the JunosE BGP and
MPLS Configuration Guide
Chapter 7: S Commands
615