Radius Nas-Port-Format - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

radius nas-port-format

Syntax
Release Information
Description
Options
Mode
332
radius nas-port-format { 0ssssppp | ssss0ppp }
no radius nas-port-format
Command introduced before JunosE Release 7.1.0.
Configures the RADIUS client's use of a specific format for RADIUS attribute 5, NAS-Port.
The no version removes the format.
0ssssppp—Sets the RADIUS client to use the 0ssssppp format where s is slot and p is
port
ssss0ppp—Sets the RADIUS client to use the ssss0ppp format where s is slot and p is
port
Global Configuration
Copyright © 2010, Juniper Networks, Inc.