JunosE 11.3.x Command Reference Guide N to Z
Release Information
Description
Options
366
[ metric absoluteValue | tag tagValue | route-map mapTag ]*
no redistribute { fromProtocol | ospf match internal } | metric-type [ 1 | 2 ]
[ metric [ absoluteValue ] | tag [ tagValue ] | route-map [ mapTag ] ]*
[ no ] redistribute ospf
{ match internal external [ 1 | 2 ] | match external [ 1 | 2 ] [ internal ] }
[ metric [ absoluteValue ] | route-map [ mapTag ] | tag [ tagValue ] ]*
For RIP:
redistribute { fromProtocol | ospf match internal [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] } [ metric absoluteValue |
route-map mapTag ]*
no redistribute { fromProtocol | ospf match internal } [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] } [ metric [ absoluteValue ] |
route-map [ mapTag ] ]*
Command introduced before JunosE Release 7.1.0.
Redistributes routes from one routing domain into another routing domain. For DVMRP,
only routes that appear in the RPF table can be redistributed. The no version ends
redistribution of information.
fromProtocol—Source protocol from which routes are being redistributed; default value
is no source protocol defined
access—Redistributes access-server routes (framed routes sourced by AAA)
access-internal—Redistributes internal host routes to directly connected clients
bgp—Routes sourced from BGP protocol
connected—Routes that are established automatically when IP is enabled on an
interface (non-multicast routing protocols). For routing protocols such as OSPF and
IS-IS, these routes are redistributed as external to the AS. When you specify the
connected keyword, only those connected networks that are configured on an
interface that is not configured to run IS-IS will be redistributed. For DVMRP, specifying
this keyword redistributes routes that are established automatically in the RPF table
when another multicast routing protocol, such as PIM, is enabled on an interface.
dvmrp—Routes sourced from DVMRP
isis—Routes sourced from IS-IS
ospf—Routes sourced from OSPF
rip—Routes sourced from RIP
static—Redistributes static routes
static ip—Redistributes static routes for IS-IS
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?