Neighbor Ebgp-Multihop - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor ebgp-multihop

Syntax
Release Information
Description
Options
Mode
36
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } ebgp-multihop
[ ttl ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Allows BGP to accept route updates from external peers residing on networks that are
not directly connected. The no version halts accepting such routers. The default version
removes the explicit configuration from the peer or peer group and reestablishes
inheritance of the feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
ttl—Maximum number of hops to the peer, in the range 1–255; default value is 255
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.