Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
radius icr-partition-accounting
Syntax
Release Information
Description
Options
Mode
322
radius icr-partition-accounting { enable | disable }
no radius icr-partition-accounting
Command introduced in JunosE Release 10.3.0.
Enables or disables sending of the ICR Partition-Accounting-On or
Partition-Accounting-Off messages to the RADIUS servers. The no version restores the
default value, disable.
enable—Configures the RADIUS client to enable the use of Partition-Accounting-On
and Partition-Accounting-Off messages. When this option is used, these messages
are sent to the accounting server configured on the virtual router.
disable— Configures the RADIUS client to disable the use of Partition-Accounting-On
and Partition-Accounting-Off messages; this is the default setting. When this option
is used, the Partition-Accounting messages are not sent to the accounting server
configured on the virtual router.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
