Show Ipv6 Static - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ipv6 static

Syntax
Release Information
Description
Options
Mode
952
show ipv6 static [ vrf vrfName ] [ ipv6Prefix [ all ] ] [ filter ]
Command introduced before JunosE Release 7.1.0.
vrf keyword and vrfName variable added in JunosE Release 7.2.0.
Displays general status information for static routes added by network management to
the routing table.
vrfName—Name of the VRF
ipv6Prefix—Prefix in the format IPv6baseaddress / length; for example, 1::1/32
all—Displays all routes starting at the specified prefix
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.