Show L2Tp Dial-Out Target - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show l2tp dial-out target

Syntax
Release Information
Description
Options
Mode
976
show l2tp dial-out target [ targetIpAddress targetIpAddressMask | allVirtualRouters ]
[ detail ] [ state operState ] [ filter ]
To display summary information:
show l2tp dial-out target summary [ allVirtualRouters ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays configured dial-out targets within the current virtual router context.
targetIpAddress—Trigger IP address for the target that you want to display
targetIpAddressMask—Mask for the trigger IP address
allVirtualRouters—Displays dial-out information for all virtual routers
detail—Displays configuration, state, and statistics
operState—One of the following operational states:
down
inService
inhibited
filter—See Filtering show Commands on page 4
summary—Displays aggregate counts for targets in each of the possible operational
and administrative states
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.