Table of Contents
Advertisement
path ds1|e1 channel-group description
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description name
no path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description
Command introduced before JunosE Release 7.1.0.
Assigns a text description or an alias to a DS1 (T1) or an E1 channel group for channelized
SONET and SDH interfaces. Use the show controllers sonet command to display the
text description. The no version removes the description or alias.
pathChannel—Number, in the range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number for the path; value is 1 for SONET and in the range
1–3 for SDH
tributaryGroup—Number, in the range 1–7, that identifies the group within the path
tributaryNumber—Number of the tributary within the tributary group; the value is in
the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary
type is tu12
channelGroupNumber—Either a fractional T1 interface in the range 1–24 or a fractional
E1 interface in the range 1–31
name—Text string or alias of up to 80 characters for the DS1 or E1 channel group for
channelized SONET and SDH interfaces
Controller Configuration
Chapter 4: P Commands
135
Advertisement
Table of Contents
