Set - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

set

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
set object
{ context-name contextName [ wildcard ] | id mibId | value objectValue }
no set [ object { context-name | id | value } ]
Command introduced before JunosE Release 7.1.0.
Performs an SNMP set operation under certain event conditions. The no version removes
the set operation.
contextName—Context name of the MIB object SNMP agent
wildcard—Specifies the context name as a wildcard
mibId—MIB object ID that you want to set; for example, 1.3.6.1.2.1.60.1.2.1.1.7
objectValue—Value to which you want to set the configured MIB object
SNMP Event Manager Configuration
Chapter 7: S Commands
471