Session-Timeout - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

session-timeout

Syntax
Release Information
Description
Options
Mode
470
[ no ] session-timeout timeOutValue
Command introduced before JunosE Release 7.1.0.
Defines the ANCP session timeout value (in seconds). The no version reverts the session
timeout to its default setting (25 seconds).
timeOutValue—Session timeout in seconds, in the range 1–25; default value is 25
seconds
L2C Configuration
Copyright © 2010, Juniper Networks, Inc.