redundant-port force-failover
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
redundant-port interfaceType interfaceSpecifier [ force-failover ]
Command introduced in JunosE Release 8.0.0.
Specifies a member link of a LAG bundle to fail over when more than one active member
link exists. There is no no version.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
force-failover—Forces the specified port to fail over
Global Configuration
Chapter 6: R Commands
377