Ntp Server - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

ntp server

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ntp server ipAddress [ version number ] [ prefer ]
[ source interfaceType interfaceSpecifier ]
no ntp server ipAddress
Command introduced before JunosE Release 7.1.0.
Specifies an NTP server for time synchronization. The source option for this command
overrides the ntp source command. The no version terminates NTP communications
between this server and the interface.
ipAddress—IP address of the NTP server
number—Value from 1 to 4; indicates the version of the NTP software on the server
prefer—Indicates that this server is the first choice for time synchronization
source—Directs responses from the NTP server to a specific interface on the router;
overrides the ntp source command
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration
Chapter 2: N Commands
103