Queue - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

queue

Syntax
Release Information
Description
Options
Mode
Related
Documentation
304
[ no ] { typeOfInterface | set | superset } queue traffic-class trafficClassName
[ queue-profile queueProfileName [ scheduler-profile schedProfileName ] |
scheduler-profile schedProfileName [ queue-profile queueProfileName ] ]
[ drop-profile dropProfileName ] [ statistics-profile statisticsProfileName ]
Command introduced before JunosE Release 7.1.0.
svlan keyword added in JunosE Release 7.1.0.
set and superset keywords added in JunosE Release 9.2.0.
Specifies that a queue traffic class be configured for the selected interface type. The no
version removes this rule from the QoS profile.
typeOfInterface—Interface type for queue traffic classes to be configured; atm, atm-vp,
atm-vc, bridge, ethernet, fr-vc, ip, ipv6, ip-tunnel, l2tp-session, l2tp-tunnel, lsp, serial,
server-port, svlan, vlan
set—Configures a queue for an interface set
superset—Configures a queue for an interface superset
trafficClassName—Name of the traffic class
queueProfileName—Name of the queue profile
schedProfileName—Name of the scheduler profile
dropProfileName—Name of the drop profile
statisticsProfileName—Name of the statistics profile
QoS Profile Configuration
Configuring a QoS Profile
Configuring Shadow Nodes
Configuring a Basic Parameter Definition for QoS Administrators
Configuring Rate Statistics
Configuring Event Statistics
Attaching a QoS Profile to an Interface Superset or an Interface Set
Copyright © 2010, Juniper Networks, Inc.