JunosE 11.3.x Command Reference Guide N to Z
rtr reaction-configuration action-type
Syntax
Release Information
Description
Options
Mode
416
rtr reaction-configuration rtrIndex [ action-type actionType ]
Command introduced before JunosE Release 7.1.0.
Sets certain actions to occur based on events under control of the RTR. The default is
that traps of enabled events are taken. There is no no version. See the no rtr
reaction-configuration command.
rtrIndex—Number of the operation to be configured, in the range 1–4294967295
actionType—One of the following types:
none—No action; selecting this option clears all traps for the given operation
trapOnly—Trap only action; this is the default; enabled events trigger the trap
Global Configuration
Copyright © 2010, Juniper Networks, Inc.